Rohde & Schwarz RTP044 - Page 1633

Remote control commands
R&S
®
RTP
1633User Manual 1337.9952.02 ─ 12
Return values:
<AckValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 1
*RST: 0
Usage: Query only
BUS<m>:CAN:FRAMe<n>:BITRate?
Returns the primary bit rate.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<PrimaryBitRate> Range: 0 to 100000000000
Increment: 1
*RST: 0
Default unit: bps
Usage: Query only
BUS<m>:CAN:FRAMe<n>:CSValue?
Returns the CRC sequence value of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<ChecksumValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 2097151
*RST: 0
Usage: Query only
BUS<m>:CAN:FRAMe<n>:DLCValue?
Returns the data length code of the selected frame - the number of data bytes in the
frame.
Protocols