Rohde & Schwarz RTP044 - Page 1634

Remote control commands
R&S
®
RTP
1634User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameDLCValue> Number of data bytes in decimal values.
Range: 0 to 15
*RST: 0
Usage: Query only
BUS<m>:CAN:FRAMe<n>:IDTYpe?
Returns the identifier type of the selected frame, the identifier format of data and
remote frames.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<IdentifierType> ANY | B11 | B29
B11: standard format, 11 bit
B29: extended format, 29 bit
*RST: B11
Usage: Query only
BUS<m>:CAN:FRAMe<n>:IDValue?
Returns the identifier value of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<IdentifierValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 536870911
*RST: 0
Usage: Query only
Protocols