Rohde & Schwarz RTP044 - Page 1638

Remote control commands
R&S
®
RTP
1638User Manual 1337.9952.02 ─ 12
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SFTYpe <SearchName>,<FrameType>
SEARch:TRIGger:CAN:SFTYpe? <SearchName>
Enables the search for a specified frame type.
Parameters:
<FrameType> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SFIDentifier <SearchName>,<Identifier>
SEARch:TRIGger:CAN:SFIDentifier? <SearchName>
Enables the search for frame indentifier.
Parameters:
<Identifier> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SIDData <SearchName>,<IdentifierData>
SEARch:TRIGger:CAN:SIDData? <SearchName>
Enables the search for identifier and data.
Parameters:
<IdentifierData> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SERRor <SearchName>,<ErrorCondition>
SEARch:TRIGger:CAN:SERRor? <SearchName>
Enables the search for a specified error.
Parameters:
<ErrorCondition> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols