Rohde & Schwarz RTP044 - Page 1680

Remote control commands
R&S
®
RTP
1680User Manual 1337.9952.02 ─ 12
For a description of the returned values, see the corresponding commands in Chap-
ter 22.17.7.3, "Decode results", on page 1665.
SEARch:RESult:LIN:FCOunt?.......................................................................................1680
SEARch:RESult:LIN:FRAMe<m>:STATus?.....................................................................1680
SEARch:RESult:LIN:FRAMe<m>:STARt?.......................................................................1680
SEARch:RESult:LIN:FRAMe<m>:STOP?....................................................................... 1681
SEARch:RESult:LIN:FRAMe<m>:DATA?........................................................................1681
SEARch:RESult:LIN:FRAMe<m>:SDATa?...................................................................... 1681
SEARch:RESult:LIN:FRAMe<m>:SDEXport?..................................................................1682
SEARch:RESult:LIN:FRAMe<m>:CSSTate?................................................................... 1682
SEARch:RESult:LIN:FRAMe<m>:CSValue?................................................................... 1682
SEARch:RESult:LIN:FRAMe<m>:IDSTate?.................................................................... 1683
SEARch:RESult:LIN:FRAMe<m>:IDValue?.....................................................................1683
SEARch:RESult:LIN:FRAMe<m>:IDPValue?...................................................................1683
SEARch:RESult:LIN:FRAMe<m>:SYMBol?.................................................................... 1684
SEARch:RESult:LIN:FRAMe<m>:SYSTate?................................................................... 1684
SEARch:RESult:LIN:FRAMe<m>:VERSion?...................................................................1684
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:STATe?........................................................1684
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:VALue?........................................................1685
SEARch:RESult:LIN:FCOunt? <SearchName>
Query parameters:
<SearchName>
Return values:
<Count> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:STATus? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<State> OK | UART | CHCKsum | VERS | LENer | SPERror | PRERror |
SYERror | WAKeup | CPERror | INSufficient | INComplete
*RST: OK
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:STARt? <SearchName>
Suffix:
<m>
.
*
Protocols