Rohde & Schwarz RTP044 - Page 1789

Remote control commands
R&S
®
RTP
1789User Manual 1337.9952.02 ─ 12
Return values:
<TypeLen> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:TBTO:RESult:FRAMe<n>:WORD<o>:TYPE?
Returns the data type for the selected word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word.
Return values:
<WordType>
Usage: Query only
BUS<m>:TBTO:RESult:FRAMe<n>:WORD<o>:VALue?
Returns the data value for the selected word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word.
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
22.17.12.3 Trigger
The trigger suffix <m> is always 1 and can be omitted. It selects the trigger event: Only
the A-trigger is available for triggering on serial buses.
To trigger on a serial bus, make sure that:
●
TRIGger<m>:SOURce[:SELect] is set to SBUS.
Protocols