Rohde & Schwarz RTP044 - Page 1828

Remote control commands
R&S
®
RTP
1828User Manual 1337.9952.02 ─ 12
RRD: Register Read
ERWR: Extended Register Write
ERRD: Extended Register Read
ERWL: Extended Register Write Long
ERRL: Extended Register Read Long
MASR: Master Read
MASW: Master Write
MASOHO: Master Ownership Handover
IRSUM: Interrupt Summary and Notification
MSKW: Masked Write
MCTR: Master Context Transfer Read
MCTW: Master Context Transfer Write
ERRor: The bits defining the command sequence are not valid,
no supported command sequence
*RST:
RZWR
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:SADD?
Returns the slave address of the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameSID> Range: 0 to 15
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:ADDRess?
Returns the register address of the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameAddress> Range: Depends on the sequence type, address can have
0, 5, 8, or 16 bits
Increment: 1
*RST: 0
Usage: Query only
Protocols