Rohde & Schwarz RTP044 - Page 1917

Remote control commands
R&S
®
RTP
1917User Manual 1337.9952.02 ─ 12
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:MPHY:FRAMe<m>:CELL<n>:STOP? <SearchName>
Returns the stop time of the cell with the selected field number within the frame with
the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:MPHY:FRAMe<m>:CELL<n>:STATe? <SearchName>
Returns the state type within the search result for the selected cell.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<State> OK | RSVDERROR | CMDERROR | SYMBOLERROR |
UNKNOWNERROR | INVALID | INCOMPLETE | UNCorrelated |
CRCERROR | VOOR | LENGTHERROR
*RST: OK
Usage: Query only
SEARch:RESult:MPHY:FRAMe<m>:DATA? <SearchName>
Returns the data for the selected frame within the search result, corresponds to the
Data column in the search results table.
Protocols