Rohde & Schwarz RTP044 - Page 1983

Remote control commands
R&S
®
RTP
1983User Manual 1337.9952.02 ─ 12
<n> *
Return values:
<State> OK | UNK | DISPARITY | DISParity | GLITCH | GLITch
OK
There are no errors in the state of the specified symbol.
UNK
An unknown error was detected for the specified symbol.
DISPARITY = DISParity
A disparity error was detected for the specified symbol.
GLITCH = GLITch
A glitch error was detected for the specified symbol.
*RST: OK
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:STOP?
Returns the stop time of the specified symbol.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:BYTE?
Returns the symbol byte value.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Byte> Range: 0 to 0
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:KDCode?
Returns the K/D code.
Protocols