Rohde & Schwarz RTP044 - Page 2036

Remote control commands
R&S
®
RTP
2036User Manual 1337.9952.02 ─ 12
Parameters:
<ET>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:TMAX <SearchName>,<ETTo>
SEARch:TRIGger:USB:TMAX? <SearchName>
Sets the the end value of an endpoint type (ET) range if TRIGger<m>:USB:
TCONdition is set to INRange or OORange.
Parameters:
<ETTo>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:TOKen
<SearchName>,<USBTokenType>
SEARch:TRIGger:USB:TOKen? <SearchName>
Defines, which token packet type is searched for: "OUT", "IN", "SOF", "SETUP", or
"Any" token packet.
Parameters:
<USBTokenType> ANY | OUT | IN | SOF | SETup
ANY
Searches for any of the token packet types listed below.
OUT
Searches for an OUT token.
IN
Searches for an IN token.
SOF
Searches for a start of frame (SOF) token.
SETup
Searches for a SETup token.
*RST:
OUT
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WADD <SearchName>,<AddressCheck>
SEARch:TRIGger:USB:WADD? <SearchName>
Defines, whether a search for any address field shall be activated or not.
Parameters:
<AddressCheck> ON | OFF
*RST: OFF
Protocols