Rohde & Schwarz RTP044 - Page 2072

Remote control commands
R&S
®
RTP
2072User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:USBThree:DMIN............................................................................... 2074
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:DMIN.................................................2074
SEARch:TRIGger:USBThree:DMAX.............................................................................. 2074
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:DMAX............................................... 2074
SEARch:TRIGger:USBThree:BIT...................................................................................2075
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:BIT....................................................2075
SEARch:TRIGger:USBThree:IOPerator..........................................................................2075
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:IOPerator...........................................2075
SEARch:TRIGger:USBThree:IMIN.................................................................................2076
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:IMIN..................................................2076
SEARch:TRIGger:USBThree:IMAX................................................................................2076
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:IMAX.................................................2076
SEARch:TRIGger:USBThree:ERENable <SearchName>,<ErrorName>, <Enabler>
SEARch:TRIGger:USBThree:ERRor<m>:ENABle <SearchName>,<Enable>
SEARch:TRIGger:USBThree:ERRor<m>:ENABle? <SearchName>
Enables the search for errors. You can search for all error types in parallel.
Suffix:
<m>
.
*
Specifies the error.
Parameters:
<Enable> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName> String with the name of the search.
Example: Searches for CRC and length errors:
SEARch:TRIGger:USBThree:ERRor1:ENABle ON
Enables searching for CRC Error.
SEARch:TRIGger:USBThree:ERENable "Length
Error",ON
Enables searching for Length Error.
SEARch:TRIGger:USBThree:FRENable <SearchName>,<Frame>, <Enabler>
SEARch:TRIGger:USBThree:FRAMe<m>:ENABle <SearchName>,<Enable>
SEARch:TRIGger:USBThree:FRAMe<m>:ENABle? <SearchName>
Defines the frame type to be searched for.
Suffix:
<m>
.
*
Parameters:
<Enable> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols