Rohde & Schwarz RTP044 - Page 2313

Remote control commands
R&S
®
RTP
2313User Manual 1337.9952.02 ─ 12
ERRor
Ends remote trace when a SCPI error occurs.
BUFFerfull
Ends remote trace when the maximum file size is reached.
TRACe:REMote:MODE:FILE:ENABle <Enable>
Enables and disables the remote trace to file.
Parameters:
<Enable> ON | OFF
TRACe:REMote:MODE:FILE:FILTer
<Input>, <Output>, <Error>, <Trigger>,
<DeviceClear>, <StatusRegister>, <Connection>, <RemoteLocalEvents>,
<Locking>
Defines the content of the remote trace file.
Parameters:
<Input> ON | OFF
Input data
<Output> ON | OFF
Output data
<Error> ON | OFF
New SCPI error queue entries
<Trigger> ON | OFF
Trigger events
<DeviceClear> ON | OFF
Device clear events
<StatusRegister> ON | OFF
Status register conditions
<Connection> ON | OFF
Open/close connection events
<RemoteLocalEvents>ON | OFF
Local/remote transition events
<Locking> ON | OFF
Remote locking events
Remote trace