Rohde & Schwarz RTP044 - Page 469

Search functions
R&S
®
RTP
469User Manual 1337.9952.02 ─ 12
Remote command:
SEARch:RESDiagram:SHOW on page 1513
Y mode
Defines whether absolute or relative values are used to specify the y-axis values.
Remote command:
LAYout:ZOOM:VERTical:MODE on page 1323
SEARch:RESDiagram:VERT:MODE on page 1514
Y position
Defines the y-value of the centerpoint of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:ABSolute:POSition on page 1324
LAYout:ZOOM:VERTical:RELative:POSition on page 1325
SEARch:RESDiagram:VERT:ABSolute:POSition on page 1513
SEARch:RESDiagram:VERT:RELative:POSition on page 1514
Y range
Defines the height of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:RELative:SPAN on page 1325
LAYout:ZOOM:VERTical:ABSolute:SPAN on page 1324
SEARch:RESDiagram:VERT:ABSolute:SPAN on page 1513
SEARch:RESDiagram:VERT:RELative:SPAN on page 1514
X mode
Defines whether absolute or relative values are used to specify the x-axis values.
Remote command:
LAYout:ZOOM:HORZ:MODE on page 1320
SEARch:RESDiagram:HORZ:MODE on page 1512
X position
Defines the x-value of the centerpoint of the zoom area.
Remote command:
LAYout:ZOOM:HORZ:ABSolute:POSition on page 1320
LAYout:ZOOM:HORZ:RELative:POSition on page 1322
SEARch:RESDiagram:HORZ:ABSolute:POSition on page 1511
SEARch:RESDiagram:HORZ:RELative:POSition on page 1512
X range
Defines the width of the zoom area.
Remote command:
LAYout:ZOOM:HORZ:ABSolute:SPAN on page 1321
LAYout:ZOOM:HORZ:RELative:SPAN on page 1322
SEARch:RESDiagram:HORZ:ABSolute:SPAN on page 1512
SEARch:RESDiagram:HORZ:RELative:SPAN on page 1512
Search display presentation