Mixed signal option (MSO, R&S RTP-B1)
R&S
®
RTP
931User Manual 1337.9952.02 ─ 12
Clock source ← Clocked bus
Selects the digital channel used as clock.
Remote command:
BUS<m>:PARallel:CLOCk on page 2205
Clock slope ← Clocked bus
Selects the slope of the clock signal at which all digital channels of the bus are ana-
lyzed.
Remote command:
BUS<m>:PARallel:CLSLope on page 2206
14.1.1.3 Label settings
Access: "Menu" > "Logic" > "Label" tab
In this tab, you can enter a name for each digital channel. The name is displayed in the
diagram.
14.1.1.4 Skew settings
Access: "Menu" > "Logic" > "Skew" tab
Digital channels and parallel buses
To Next Page
Loading...
