Waveform generator (Option R&S RTP-B6)
R&S
®
RTP
964User Manual 1337.9952.02 ─ 12
Remote command:
WGENerator<m>:MODulation:AM:DEPTh on page 2224
Symmetry
Sets the symmetry for the ramp modulation waveform, the percentage of time that the
waveform is rising.
Remote command:
WGENerator<m>:MODulation:AM:SYMMetry on page 2224
Duty cycle
Sets the duty cycle for a square waveform. The duty cycle expresses for what percent-
age fraction of the period, the waveform is active, i.e. the signal state is high.
Remote command:
WGENerator<m>:MODulation:AM:DCYCle on page 2223
15.1.3.3 PWM modulation
For pulse width modulation (PWM), the time for which the signal is in a high state is
varied according to the modulation signal.
Modulation signal
Selects the type of the modulation signal for the PWM modulation types.
Setup of the waveform generator
To Next Page
Loading...
