Rohde & Schwarz RTP164 - Page 1290

Remote control commands
R&S
®
RTP
1290User Manual 1337.9952.02 ─ 12
TRIGger<m>:SERPattern:EBTB:ERRor<n>:DISParity <EBTBDisparityErr>
Enables triggering on disparity errors.
Suffix:
<m>
.
1..3
<n> *
Parameters:
<EBTBDisparityErr> ON | OFF
*RST: OFF
Usage: Asynchronous command
TRIGger<m>:SERPattern:EBTB:ERRor<n>:SYMBol
<EBTBSymbolError>
Enables triggering on symbol errors.
Suffix:
<m>
.
1..3
<n> *
Parameters:
<EBTBSymbolError> ON | OFF
*RST: OFF
Usage: Asynchronous command
TRIGger<m>:SERPattern:EBTB:FID <EBTBFrameId>
Selects the frame ID.
Suffix:
<m>
.
1..3
Parameters:
<EBTBFrameId> K280
*RST: K280
Usage: Asynchronous command
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:DMINus?
Returns the value for the negative running disparity RD-.
Suffix:
<m>
.
1..3
<n> 1...16
Sets the index of the symbol.
Return values:
<DMinus>
Trigger