Rohde & Schwarz RTP164 - Page 1564

Remote control commands
R&S
®
RTP
1564User Manual 1337.9952.02 ─ 12
BUS<m>:I2C:FRAMe<n>:ACCess?
Returns the value of the R/W bit of the indicated frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<RWBit> UNDefined | READ | WRITe | EITHer
*RST: UNDefined
Usage: Query only
BUS<m>:I2C:FRAMe<n>:ACOMplete?
Returns if the address is completely contained in the acquisition.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddressComplete> ON | OFF
*RST: OFF
Usage: Query only
BUS<m>:I2C:FRAMe<n>:ADBStart?
Returns the start time of the address acknowledge bit.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddrAckBtStrt> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
Protocols