Rohde & Schwarz RTP164 - Page 1585

Remote control commands
R&S
®
RTP
1585User Manual 1337.9952.02 ─ 12
Return values:
<ByteAckBitStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:COMPlete? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<ByteComplete> ON | OFF
*RST: OFF
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:STARt? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<ByteStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:VALue? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Protocols