Rohde & Schwarz RTP164 - Page 1614

Remote control commands
R&S
®
RTP
1614User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
The suffix is irrelevant.
Return values:
<Count> Number of words
Usage: Query only
BUS<m>:UART:WORD<n>:SOURce?
Returns the line on which the specified word was transferred.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<WordSource> TX | RX
*RST: TX
Usage: Query only
BUS<m>:UART:WORD<n>:STARt?
Returns the start time of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<WordStart> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:UART:WORD<n>:STATe?
Returns the status of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols