Rohde & Schwarz RTP164 - Page 1723

Remote control commands
R&S
®
RTP
1723User Manual 1337.9952.02 ─ 12
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:SSM <SearchName>,<SSM>
SEARch:TRIGger:ARINc:SSM? <SearchName>
Sets the sign/status matrix (SSM) bits.
Parameters:
<SSM>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:CODing <SearchName>,<CodingError>
SEARch:TRIGger:ARINc:ERRor:CODing? <SearchName>
Enables the search for coding errors.
Parameters:
<CodingError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:PARity <SearchName>,<ParityError>
SEARch:TRIGger:ARINc:ERRor:PARity? <SearchName>
Enables the search for parity errors.
Parameters:
<ParityError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:TIMing <SearchName>,<MinGapSelect>
SEARch:TRIGger:ARINc:ERRor:TIMing? <SearchName>
Enables the search for timing errors, when the minimum gap is out of range.
Parameters:
<MinGapSelect> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols