Rohde & Schwarz RTP164 - Page 2150

Remote control commands
R&S
®
RTP
2150User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:PCIE:DLLP:FCTL:VCID <SearchName>,<VirtualChnID>
SEARch:TRIGger:PCIE:DLLP:FCTL:VCID? <SearchName>
Sets the virtual channel ID to be searched for, for the data link layer.
Parameters:
<VirtualChnID> ANY | ZERO | ONE | TWO | THREE | FOUR | FIVE | SIX |
SEVEN
*RST: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:DLLP:MULT:AUTH
<SearchName>,<Authorized>
SEARch:TRIGger:PCIE:DLLP:MULT:AUTH? <SearchName>
Sets the authorized presence state to be searched for, for the data link layer.
Parameters:
<Authorized> ANY | YES | NO
*RST: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:DLLP:MULT:CRET <SearchName>,<CreditType>
SEARch:TRIGger:PCIE:DLLP:MULT:CRET? <SearchName>
Sets the credit type to be searched for, for the data link layer.
Parameters:
<CreditType> ANY | DATA | HEADER
*RST: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:DLLP:MULT:DVPT <SearchName>,<DevicePortType>
SEARch:TRIGger:PCIE:DLLP:MULT:DVPT? <SearchName>
Sets the device/port type to be searched for, for the data link layer.
Parameters:
<DevicePortType> ANY | ZERO | ONE | TWO | THREE | FOUR | FIVE | SIX |
SEVEN | EIGHT | NINE | TEN | ELEVEN | TWELVE |
THIRTEEN | FOURTEEN | FIFTEEN
*RST: ANY
Parameters for setting and query:
<SearchName>
Protocols