Rohde & Schwarz Scope Rider RTH - Instrument Settings

General Instrument Setup
R&S
®
Scope Rider RTH
284User Manual 1326.1578.02 ─ 12
Set display language
Description of settings
User Interface Language
Select the language in which the functions and messages are displayed. Supported
languages are listed in the data sheet. The help is provided in English.
The instrument changes the language after a few seconds, a reboot is not required.
Time
Set the local time in the following order: hours / minutes / seconds.
Remote command:
SYSTem:TIME on page 502
Date
Set the date in the following order: year / month / day.
Remote command:
SYSTem:DATE on page 501
13.5 Instrument Settings
Access: or "Setup" menu
Instrument Settings