Preface
R&S
®
Scope Rider RTH
17Getting Started 1326.1561.02 ─ 10
– Measurements: voltage: DC, AC, AC+DC, resistance, continuity test, diode
test, capacitance, temperature (with PT 100 temperature probe), fre-
quency, current (with current clamp or shunt)
●
Protocol trigger and decode (optional)
●
Logic analysis with 8 additional digital inputs (optional)
General data
●
Display: 7.0'' LC TFT color display with 800 × 480 pixel resolution (WVGA)
●
Weight with battery: 2.4 kg (5.3 lb) (nom.)
●
Dimensions W x H x D:
201 mm x 293 mm x 74 mm (7.91 in x 11.54 in x 2.91 in)
●
Interfaces: USB host, USB device, LAN
●
Internal storage medium: removable 4 Gbyte microSD card
Power supply
●
Power adapter
– Input: 100 V to 240 V AC, 50 Hz to 60 Hz, 1.5 A
– Output: +15 V DC, 4.0 A
●
Lithium-ion rechargeable smart battery
voltage 11.25 V; capacity 72.0 Wh
Environmental conditions
●
Operating temperature
– Battery only: 0 °C to +50 °C
– Power adapter: 0 °C to +40 °C
●
Storage temperature: –20 °C to +50 °C
●
Climatic loading: +25° C/+55 °C at 95 % rel. humidity cyclic, in line with IEC
60068-2-30
●
Altitude
– Operating:
CAT IV 600 V, CAT III 1000 V: up to 2000 m above sea level
CAT III 600 V, CAT II 1000 V: up to 3000 m above sea level
– Nonoperating: up to 4600 m above sea level
●
Pollution degree 2
Main specifications
To Next Page
Loading...
