Preface
R&S
®
Scope Rider RTH
20Getting Started 1326.1561.02 ─ 10
●
Getting Started
The Getting Started manual provides the information needed to set up and
start working with the instrument, and describes basic operations. A printed
English version is included in the delivery.
●
User Manual
The user manual describes all instrument modes and functions in detail. It
also provides an introduction to remote control and a complete description of
the remote control commands with programming examples. The newest ver-
sion of the manual is available in English on the R&S RTH product website at
www.rohde-schwarz.com/manual/rth.
●
Specifications and product brochure
The specifications document, also known as the data sheet, contains the com-
plete instrument specification. It also lists the options and their order numbers,
and optional accessories. The product brochure provides an overview of the
instrument and deals with the specific characteristics. The documents are
available at www.rohde-schwarz.com/brochure-datasheet/rth.
●
Calibration Certificate
The document is available on https://gloris.rohde-schwarz.com/calcert.
●
Open Source Acknowledgment
The Open Source Acknowledgment document provides verbatim license text
of open source software that is used in the instrument's firmware. It is availa-
ble on the R&S RTH website at www.rohde-schwarz.com/firmware/rth, and it
can be read directly on the instrument.
●
Instrument Security Procedures manual
Provides information on security issues when working with the R&S RTH in
secure areas.
●
Application cards and application notes
These documents deal with special applications or background information on
particular topics. See www.rohde-schwarz.com/application/rth
Documentation overview
To Next Page
Loading...
