Operating the instrument
R&S
®
Scope Rider RTH
40Getting Started 1326.1561.02 ─ 10
Figure 5-6: Set numerical values using the wheel
Data entry using wheel and keypad
You can enter precise numerical values on the keypad. See also Figure 5-7.
1. Set the focus to the required setting, and press the wheel button twice.
2. Turn the wheel until the focus is on the required number.
3. Press the wheel button.
4. Turn the wheel until the focus is on the required unit.
5. Press the wheel button.
Accessing the functionality
To Next Page
Loading...
