Data Logging
R&S
®
Scope Rider RTH
165User Manual 1326.1578.02 ─ 12
Figure 8-6: Logger zoom with summarized data
1 = Maximum values
2 = Average values
3 = Minimum values
Description of settings
Access: "Zoom" menu
Figure 8-7: Zoom settings
Enable
Turns the zoom on or off.
Remote command:
LOGGer:ZOOM:ENABle on page 420
Horizontal Scale
Sets the horizontal scale of the horizontal axis for all logged signals, in seconds per
division.
Remote command:
LOGGer:ZOOM:SCALe on page 421
Position, Position Date
Sets the position of the zoomed area in relation to the left side of the display.
Analyzing Logged Data
To Next Page
Loading...
