Rohde & Schwarz Scope Rider RTH1004 - Page 271

Documenting Results
R&S
®
Scope Rider RTH
271User Manual 1326.1578.02 ─ 12
a) Tap "Select Waveform".
b) ● Select one waveform for export.
● Or select all active waveforms.
5. Select the "File Format".
6. Check the "Directory", the "Filename Base", and the "CSV Column Delimiter".
Adjust if necessary.
7. If you need time information for analysis, enable "Store with Time".
8. If you want to save history data, enable "Save History".
9. Tap "Save Waveform".
All export settings are described in Chapter 12.4.2, "Waveform Export Settings",
on page 271.
12.4.2 Waveform Export Settings
Access: [FILE] > "Waveforms"
Select Waveform
Select the waveform to be exported. You can export:
●
A single analog channel or math waveform
●
All active digital channels
●
All active waveforms at once
Waveforms