Getting Started
R&S
®
Scope Rider RTH
32User Manual 1326.1578.02 ─ 12
Key Press shortly Press and hold
[LEVEL] activates the trigger level to be set using the wheel. If the trigger type
has two trigger levels, pressing the key toggles the upper and lower levels.
[ACQUIRE] opens or closes the "Acquire" dialog to adjust the acquisition mode.
[Power] key: switches the power on or off
2.4.2 Selecting the Mode
A mode comprises all settings and functions that are needed to perform a measure-
ment task. Selecting the mode is the first setup step.
1. Press the [MODE] key.
2. Select the mode:
● On the touchscreen: Tap the required mode icon.
● Using controls: Turn the wheel until the required mode is marked, and press
the wheel button to select the mode.
Operating Basics
To Next Page
Loading...
