Rohde & Schwarz Scope Rider RTH1004 - Page 364

Remote Control Commands
R&S
®
Scope Rider RTH
364User Manual 1326.1578.02 ─ 12
Usage: Query only
SPECtrum:MARKer:RESult<m>:FREQuency[:VALue]?
Queries the frequency of the specified marker.
Suffix:
<m>
.
1 to 15
Number of the marker. The maximum number depends on how
many markers were selected and how many peaks were detec-
ted (see SPECtrum:MARKer:RCOunt? on page 363).
Return values:
<Frequency> Range: -10E+9 to 10E+9
Increment: 10
*RST: 10E+6
Default unit: Hz
Usage: Query only
SPECtrum:MARKer:RESult<m>:FREQuency:DELTa?
Queries the frequency difference between the reference marker and the specified
marker.
Suffix:
<m>
.
1 to 15
Marker; maximum depends on active markers and detected
peaks (see SPECtrum:MARKer:COUNt and SPECtrum:
MARKer:RCOunt?
Return values:
<FrequencyDelta> Range: -10E+9 to 10E+9
Increment: 10
*RST: 10E+6
Default unit: Hz
Usage: Query only
SPECtrum:MARKer:RESult<m>:LEVel[:VALue]?
Queries the power level of the specified marker in relation to the reference marker (see
SPECtrum:MARKer:RMARker:VALue? on page 365).
Suffix:
<m>
.
1 to 15
Number of the marker. The maximum number depends on how
many markers were selected and how many peaks were detec-
ted (see SPECtrum:MARKer:RCOunt? on page 363).
Spectrum Analysis