Rohde & Schwarz Scope Rider RTH1004 - Page 432

Remote Control Commands
R&S
®
Scope Rider RTH
432User Manual 1326.1578.02 ─ 12
BUS:I2C:FRAMe<m>:ADBStart?
Returns the start time of the address acknowledge bit.
Suffix:
<m>
.
*
Return values:
<AddressAckBitStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:ADDRess?
Returns the address value of the indicated frame including the R/W bit.
Suffix:
<m>
.
*
Return values:
<Address> Range: 0 to 2047
Increment: 1
*RST: 0
Usage: Query only
BUS:I2C:FRAMe<m>:ADEVice?
Returns the pure device address of the indicated frame without the R/W bit.
Suffix:
<m>
.
*
Return values:
<DeviceAddress> Range: 0 to 1023
Increment: 1
*RST: 0
Usage: Query only
BUS:I2C:FRAMe<m>:AMODe?
Returns the address length.
Suffix:
<m>
.
*
Return values:
<AddressType> BIT7 | BIT10 | ANY
*RST: BIT7
Protocol Analysis