Remote Control Commands
R&S
®
Scope Rider RTH
464User Manual 1326.1578.02 ─ 12
Suffix:
<m>
.
*
Return values:
<FrameState> OK | OVLD | ERR | BTST | CRC | NOACk | SERRror | FORM |
CAERror | FCERror | SCERror | SAERror | SFERror | SCAE |
SCFE | INSufficient
Status for CAN and CAN FD:
OK: the frame is valid.
OVLD: Overload frame
ERR: Error frame
BTST: Bit stuffing error occurred.
CRC: Cyclic redundancies check failed.
NOACK: Acknowledge is missing.
FORM: Fixed-bit form error
CAERror: CRC error followed by an acknowledgement error
(missing acknowledge)
FCERor: CRC error followed by a form error (wrong CRC delim-
iter or wrong ACK delimiter)
INSufficient: The frame is not contained completely in the acqui-
sition. The acquired part of the frame is valid.
Status for CAN FD only:
SERRRor: Stuff count error
SAERror: Stuff count error followed by acknowledgement error
SFERror: Stuff count error followed by a form error
SCAE: Stuff count error followed by CRC error and acknowl-
edgement error
SCFE: Stuff count error followed by CRC error and form error
*RST:
OK
Usage: Query only
BUS:CAN:FRAMe<m>:SYMBol?
Returns the symbolic label of the specified frame if the label list is enabled.
Suffix:
<m>
.
*
Return values:
<Label> String with symbolic label of the identifier
Usage: Query only
BUS:CAN:FRAMe<m>:TYPE?
Returns the frame type of the selected frame.
Protocol Analysis
To Next Page
Loading...
