Rohde & Schwarz Scope Rider RTH1004 - Page 471

Remote Control Commands
R&S
®
Scope Rider RTH
471User Manual 1326.1578.02 ─ 12
Suffix:
<m>
.
*
<n> *
Return values:
<ByteValue> Range: 0 to 255
*RST: 0
Usage: Query only
BUS:LIN:FRAMe<m>:CSSTate?
Returns the checksum state of the specified frame.
Suffix:
<m>
.
*
Return values:
<ChecksumState> OK | STERror | SPERror | UVAL | NOEXists | INSufficient
STERror: start error
SPERror: stop error
UVAL: unexpected value
NOEXists: byte does not exist
INSufficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
*RST: OK
Usage: Query only
BUS:LIN:FRAMe<m>:CSValue?
Returns the checksum value of the specified frame.
Suffix:
<m>
.
*
Return values:
<ChecksumValue> Range: 0 to 255
*RST: 0
Usage: Query only
BUS:LIN:FRAMe<m>:DATA?
Returns the data bytes of the specified frame.
Suffix:
<m>
.
*
Protocol Analysis