Remote Control Commands
R&S
®
Scope Rider RTH
482User Manual 1326.1578.02 ─ 12
BUS:SENT:FRAMe<m>:DSTatus?
Returns the status of the frame.
Suffix:
<m>
.
*
Return values:
<FrameState> OK | TMSE | SDIF | CRC | PAUSe | NEG | TCERror | SCERror |
SPERror | SNERror | CPERror | CNERror | PNERror | SCPE |
SCNE | SPNE | CPNE | SCPN | SLENgth | NLENgth |
INSufficient
*RST: OK
Usage: Query only
BUS:SENT:FRAMe<m>:IDTYpe?
Returns the identifier type of the selected frame.
Suffix:
<m>
.
*
Return values:
<FrameIdentifierType>NONE | B4 | B8
B4: standard format, 4 bit
B8: extended format, 8 bit
*RST: B4
Usage: Query only
BUS:SENT:FRAMe<m>:IDValue?
Returns the identifier value of the selected frame.
Suffix:
<m>
.
*
Return values:
<IdentifierValue> The values below – range, increment and reset – are decimal
values.
Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
BUS:SENT:FRAMe<m>:NIBBle<n>:STATe?
Returns the state of the specified nibble.
Protocol Analysis
To Next Page
Loading...
