General Instrument Settings and Instrument Setup
R&S
®
SGS100A
140User Manual 1173.9105.02 ─ 12
The dialog provides access to the network settings, like settings about the general net-
work environment and specific identification of the computer in the network. The dialog
also displays an indication whether the instrument is connected to the network or not.
Restart Network
Shuts down the network connection of the instrument and then re-establishes the con-
nection.
This function can be used to resolve network problems.
Note: Only the connection of the instrument to the network restarts, the network itself
is not affected.
Hostname
Displays the individual computer name of the instrument.
A predefined name is indicated and can be used for network connections, see Chap-
ter 6.4.3, "Finding Out the Default Hostname of the Instrument", on page 71.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors may affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname on page 270
MAC Address
Indicates the MAC address of the network adapter.
Address Mode
Selects if the IP address is assigned automatically or manually.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors may affect the entire network.
Network Settings
To Next Page
Loading...
