Preparing for Use
R&S
®
SGS100A
18User Manual 1173.9105.02 ─ 12
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift or carry the
instrument. Do not apply excessive force to the handles. If a handle is ripped off, the
falling instrument can cause injury.
2.1.3 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Getting started printed manual
2.1.4 Placing or Mounting the Instrument
The R&S SGS is designed for use under laboratory conditions, either on a bench top
or in a rack using a rack adapter kit (order number see data sheet).
Bench top operation
If the R&S SGS is operated on a bench top, the surface should be flat. The instrument
can be used in horizontal position, standing on its feet.
Putting into Operation
To Next Page
Loading...