Rohde & Schwarz SGS100A - System:protect<Ch>[:State]; System:restart; System:shutdown; System:startup:complete

Remote Control Commands
R&S
®
SGS100A
274User Manual 1173.9105.02 ─ 12
:SYSTem:RESTart
Restarts the firmware. The operating system remains active.
Usage: Event
:SYSTem:SHUTdown
Shuts down the instrument.
Usage: Event
:SYSTem:STARtup:COMPlete?
Queries if the startup of the instrument is completed.
Return values:
<Complete> 0 | 1 | OFF | ON
*RST: 0
Example:
SYST:STAR:COMP?
// 1
// the startup of the instrument is completed
Usage: Query only
:SYSTem:PROTect<ch>[:STATe] <State>[, <Key>]
Activates and deactivates the specified protection level.
Suffix:
<ch>
.
Indicates the protection level.
Parameters:
<State> select
*RST: n.a. (factory preset: 1)
Setting parameters:
<Key> integer
The respective functions are disabled when the protection level
is activated. No password is required for activation of a level. A
password must be entered to deactivate the protection level.
The password for the first level is 123456.
Example:
// to activate protection level
SYSTem:PROTect1:STATe 1
// internal adjustments or hostname cannot be changed
// to unlock protection level 1
SYSTem:PROTect1:STATe 0,123456
// internal adjustments are accessible
SYSTem Subsystem