Instrument Tour
R&S
®
SGS100A
35User Manual 1173.9105.02 ─ 12
SMA female type connectors, for reference or local oscillator signals, and alternatively
also in MIMO setups.
Reference input and output:
●
[REF IN]: Input for external reference signal.
●
[REF OUT]: Output of internal reference signal.
Local oscillator input and output:
●
[LO IN]: Input for external LO signals
●
[LO OUT]: Output of internal LO signals.
Note: The local oscillator input/output requires the additional software option
R&S SGS-K90.
[TRIG]
Multi-purpose connector. The [TRIG] connector is used mainly as an input connector
for an external pulse modulator source.
[AC supply and power switch]
The AC supply and power switch allow you to connect the R&S SGS to the power sup-
ply and switch on the instrument.
For details, see "To connect the AC supply" on page 20.
Rear Panel Tour
To Next Page
Loading...