System Overview
R&S
®
SGS100A
50User Manual 1173.9105.02 ─ 12
9. Select "Test Signal Connections > Test" to trigger a check of all required signal
connections.
The diagram displays the connection state of the tested connections.
10. Select "SGMA-GUI > R&S SGS > Freq = 40 GHz", "Lev = -30 dBm".
11. Select "SGMA-GUI >SGS> RF > State > On" to enable the output of the CW sig-
nal.
Setups for Connecting an R&S SGS and an R&S SGU
To Next Page
Loading...
