Signal Generator Settings
R&S
®
SGS100A
95User Manual 1173.9105.02 ─ 12
User Cor. Data
Calls the "File Select" menu for selecting and creating a list or the "File Manager".
Remote command:
[:SOURce]:CORRection:CSET:DELete on page 240
[:SOURce<hw>]:CORRection:CSET[:SELect] on page 244
Edit User Cor. Data
Calls the editor for editing the selected user correction list.
A list consists of any number of frequency/level value pairs. The currently selected list
is displayed.
Each list is saved as a separate file with extension *.uco. The file name and the direc-
tory to which the file is saved are user-selectable.
Note: Save list only after filling both columns (frequency and level), otherwise the
entries are lost.
"Frequency /Hz"
Enters the frequency to which the level correction value applies.
Note: The "Fill..." function allows you to automatically enter any num-
ber of frequencies with freely selectable range and increment.
"Power/dB"
Enters the level correction value to which the specified frequency
applies.
Level and Power-On Settings
To Next Page
Loading...
