Signal Generator Settings
R&S
®
SGS100A
96User Manual 1173.9105.02 ─ 12
"Goto"
Selects row for editing.
If "Goto Row" is selected, a window opens for entering the requested
row.
"Edit"
Calls a selection of possible actions described below.
"Insert Range"
Insert new rows before the marked row. The number of rows to be
inserted can be defined in an entry window.
"Insert Row"
Insert a new row before the marked row.
"Fill...."
Opens a sub menu for defining a set of list values to be automatically
entered in the ucor list, see Filling the Correction List Automatically).
"Fill with sensor..."
Opens a dialog to configure the settings for automatic filling of user
correction data with an R&S NRP power sensor, see Chapter 7.5.7,
"Fill with Sensor", on page 99.
"Delete Row"
Deletes the marked row.
"Delete Range..."
Allows you to delete any number of rows starting with the marked
row. The number of rows to be deleted can be defined in an entry
window.
Level and Power-On Settings
To Next Page
Loading...