Instrument control
R&S
®
SMA100B
61Getting Started 1419.8620.02 ─ 10
Tip: For quick entry, you can enter a value in exponential representation, e.g.
1e7 for 10000000.
2. Tap the unit button to complete the entry.
The unit is added to the entry.
Tip: For quick unit change, you can enter shortcuts, e.g. for a frequency value
1e8h for 100 MHz.
For an overview of shortcuts supported by the R&S SMA100B, see chapter
"Unit Shortcuts" in the appendix of the user manual.
3. If the parameter does not require a unit, confirm the entered value by pressing
"Enter".
To enter values by using the front panel controls
1. Change the currently used parameter value by using the rotary knob or the
[Up/Down] keys.
2. If the parameter does not require a unit, confirm the entered value by pressing
the [Enter] key or any of the unit keys.
The instrument highlights the editing line to confirm the entry.
If you edit numeric data in tables, the entry field must be in edit mode: Press
[Enter], or the rotary knob to activate the edit mode.
7.5.2 Entering alphanumeric parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to
enter letters and (special) characters.
7.5.3 Undo and redo actions
Accessed via the context-sensitive menus, "Undo" allows you to restore one or
more actions on the instrument. Depending on the available memory, the "Undo"
steps can restore all actions.
"Redo" restores a previously undone action.
Entering data
To Next Page
Loading...
