Rohde & Schwarz SMA100B - COM;ID Settings

Avionic Standards
R&S
®
SMA100B
122User Manual 1178.3834.02 ─ 05
5.3.4 COM/ID Settings
Access:
► Select "VOR > COM/ID"
This dialog comprises COM/ID signal settings related to the VOR signal.
Settings
COM/ID State..............................................................................................................122
Code............................................................................................................................122
Period..........................................................................................................................123
Frequency................................................................................................................... 123
Depth...........................................................................................................................123
Time Schema.............................................................................................................. 123
Dot Length...................................................................................................................123
Dash Length................................................................................................................123
Symbol Space ............................................................................................................124
Letter Space ...............................................................................................................124
COM/ID State
Enables/disables the COM/ID signal.
See also Chapter D, "Morse Code Settings", on page 740.
Remote command:
[:SOURce<hw>]:VOR:COMid[:STATe] on page 578
Code
Sets the coding of the COM/ID signal by the international short name of the airport
(e.g. MUC for the Munich airport).
VOR Configuration and Settings