File and Data Management
R&S
®
SMA100B
293User Manual 1178.3834.02 ─ 05
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the"Edit" button
(see also Chapter 6.7, "List Editor", on page 188).
●
To perform standard file management functions, like create directories, move, copy,
delete files and/or directories, use the standard "File Manager" function (see Chap-
ter 10.8, "Using the File Manager", on page 298).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 418
:MMEMory:CATalog? on page 417
[:SOURce]:CORRection:CSET:CATalog? on page 587
Recent files
Displays the files last used.
Show SCPI List
Opens the "SCPI List", which lists the current settings of the R&S SMA100B as SCPI
commands.
The R&S SMA100B provides this function for Operation Mode > SCPI-Export.
SCPI List
Contains a list of all SCPI commands corresponding to the current instrument settings.
See also "How to create a SCPI list with the current instrument settings in one step"
on page 392
Save
Saves the current instrument settings under the defined filename.
Remote command:
:MMEMory:STORe:STATe on page 421
Save Immediate x
Stores the current instrument setting in one of the intermediate memories.
These instrument settings are retained until a different instrument setting is stored in
the intermediate memory. When the instrument is switched off, the contents of the
intermediate memories are retained.
Remote command:
*SAV on page 409
Exclude Frequency
The current frequency is retained when a stored instrument setting is loaded.
Saving and Recalling Instrument Settings
To Next Page
Loading...
