Getting Started
R&S
®
SMA100B
44User Manual 1178.3834.02 ─ 05
The on-screen key pad closes and the frequency value is displayed.
3. To set the signal level, tap the "Level" field and enter the level in the same way.
4. To activate RF signal output, select "Level" > "RF On" in the tile diagram.
The blue colored "RF On" icon indicates that the RF output is activated.
The R&S SMA100B provides the 6 GHz signal at the RF A connector at the front
panel.
Trying Out the Instrument
To Next Page
Loading...
