Remote Control Commands
R&S
®
SMA100B
474User Manual 1178.3834.02 ─ 05
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
Defines the directory into which the hardcopy files are stored if auto naming is activa-
ted (SENS:SWE:HCOP:FILE:AUTO:STAT ON).
Parameters:
<Directory> string
Example:
SENS:SWE:HCOP:FILE:AUTO:DIR 'var/nrp'
Hardcopy file are stored in directory var/nrp if automatic nam-
ing is activated.
Manual operation: See "Path" on page 256
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
Deletes all files with extensions bmp , img, png, xpm and csv in the directory set
for automatic naming.
Example:
SENS:SWE:HCOP:FILE:AUTO:DIR 'var/nrp'
Hardcopy filse are stored in directory var/nrp if automatic
naming is activated.
SENS:SWE:HCOP:FILEAUTO:DIR:CLE
Deletes all hardcopy file that are stored in the directory var/
nrp.
Usage: Event
Manual operation: See "Clear Parth" on page 257
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:FILE?
Queries the file name generated with the automatic naming settings.
Note: As default the automatically generated file name is composed of: >PAth>/
<Prefix><YYYY><MM><DD><Number>.<Format>. Each component can be deacti-
vated/ activated separately to individually design the file name.
Return values:
<File> string
Power Sensor Measurement Subsystems
To Next Page
Loading...
