Rohde & Schwarz SMAB-B92 - Page 538

Remote Control Commands
R&S
®
SMA100B
536User Manual 1178.3834.02 ─ 05
[:SOURce<hw>]:PULM:TRAin:OFFTime:POINts?............................................................. 537
[:SOURce<hw>]:PULM:TRAin:REPetition.........................................................................537
[:SOURce<hw>]:PULM:TRAin:SELect..............................................................................537
[:SOURce<hw>]:PULM:TRAin:CATalog?
Queries the available pulse train files in the specified directory.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example "Generating a pulse train signal" on page 535.
Usage: Query only
Manual operation: See "Pulse Train Data" on page 91
[:SOURce<hw>]:PULM:TRAin:DELete
<Filename>
Deletes the specified pulse train file.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See Example "Generating a pulse train signal" on page 535.
Usage: Setting only
Manual operation: See "Pulse Train Data" on page 91
[:SOURce<hw>]:PULM:TRAin:ONTime <OnTime>
[:SOURce<hw>]:PULM:TRAin:OFFTime <OffTime>
Enters the pulse on/off times values in the selected list.
Parameters:
<OffTime> Offtime#1{, Offtime#2, ...} | binary block data
List of comma-separated numeric values or binary block data,
where:
The list of numbers can be of any length.
In binary block format, 8 (4) bytes are always interpreted as a
floating-point number with double accuracy.
See :FORMat[:DATA] on page 438 for details.
The maximum length is 2047 values.
Range: 0 ns to 5 ms
Example: See Example "Generating a pulse train signal" on page 535.
Manual operation: See "Edit Pulse Train Data" on page 91
SOURce Subsystem