Rohde & Schwarz SMAB-B92 - Page 573

Remote Control Commands
R&S
®
SMA100B
571User Manual 1178.3834.02 ─ 05
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 544.
Manual operation: See "Frequency" on page 147
[:SOURce<hw>][:ILS]:MBEacon:COMid:LETTer <Letter>
Sets the length of a Morse code letter space.
Parameters:
<Letter> float
Range: 0.05 to 1
Increment: 1E-4
*RST: 0.3
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 544.
Manual operation: See " Letter Space " on page 148
[:SOURce<hw>][:ILS]:MBEacon:COMid:PERiod <Period>
Sets the period of the COM/ID signal.
Parameters:
<Period> float
Range: 0 to 120
Increment: 1E-3
*RST: 9
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 544.
Manual operation: See "Period" on page 147
[:SOURce<hw>][:ILS]:MBEacon:COMid:SYMBol <Symbol>
Sets the length of the Morse code symbol space.
Parameters:
<Symbol> float
Range: 0.05 to 1
Increment: 1E-4
*RST: 0.1
Example: See Example "Configure and generate an ILS marker beacons
signal" on page 544.
Manual operation: See " Symbol Space " on page 148
SOURce Subsystem