Rohde & Schwarz SMAB-B92 - Page 583

Remote Control Commands
R&S
®
SMA100B
581User Manual 1178.3834.02 ─ 05
SUBCarrier
Amplitude modulation of the output signal with the unmodulated
FM carrier (9960Hz) of the VOR signal.
The modulation depth of the 30 Hz signal can be set with [:
SOURce<hw>]:VOR:SUBCarrier:DEPTh.
FMSubcarrier
Amplitude modulation of the output signal with the frequency
modulated FM carrier (9960Hz) of the VOR signal.
The modulation depth of the 30 Hz signal can be set with [:
SOURce<hw>]:VOR:SUBCarrier:DEPTh.
The frequency deviation can be set with [:SOURce<hw>]:
VOR:REFerence[:DEViation].
*RST:
NORM
Example: See Example "Configure and generate a VOR signal"
on page 544.
Manual operation: See "Mode" on page 119
[:SOURce<hw>]:VOR:REFerence[:DEViation] <Deviation>
Sets the frequency deviation of the reference signal on the FM carrier.
Parameters:
<Deviation> integer
Range: 0 to 960
*RST: 480
Example: See Example "Configure and generate a VOR signal"
on page 544.
Manual operation: See "REF Deviation" on page 120
[:SOURce<hw>]:VOR:SUBCarrier:DEPTh <Depth>
Sets the AM modulation depth of the FM carrier.
Parameters:
<Depth> float
Range: 0 to 100
Increment: 0.1
*RST: 30
Example: See Example "Configure and generate a VOR signal"
on page 544.
Manual operation: See " Subcarrier Depth " on page 120
[:SOURce<hw>]:VOR:SUBCarrier[:FREQuency] <Frequency>
Sets the frequency of the FM carrier.
SOURce Subsystem