Rohde & Schwarz SMAB-B92 - Page 666

Remote Control Commands
R&S
®
SMA100B
664User Manual 1178.3834.02 ─ 05
Example:
SYSTem:COMMunicate:NETWork:IPADdress:MODE
STATic
SYSTem:COMMunicate:NETWork:IPADdress
"10.113.0.105"
Manual operation: See "Address Mode" on page 359
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it, see :
SYSTem:PROTect<ch>[:STATe].
Parameters:
<MacAddress> string
Example: See Example "Retrieving information on network-related set-
tings" on page 654.
Manual operation: See "MAC Address" on page 361
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 654.
Usage: Query only
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
SYSTem:COMMunicate:NETWork:RESTart
// Terminates the network connection and sets it up again
Usage: Event
Manual operation: See "Restart Network" on page 359
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State> 0 | 1 | OFF | ON
Example: See Example "Retrieving information on network-related set-
tings" on page 654.
SYSTem Subsystem