Rohde & Schwarz SMAB-B92 - Resolving Network Connection Failures

Troubleshooting and Error Messages
R&S
®
SMA100B
706User Manual 1178.3834.02 ─ 05
Indication and handling of permanent messages
If any critical error occurs, the R&S SMA100B automatically shows the icon in the
taskbar. Select the icon to obtain information on the error and the number of occurren-
ces.
The icon is assigned to permanent messages. The message and icon are displayed
until the error is eliminated.
Static Errors/Error History
Toggles between "Static" and "History" view of the info dialog.
Remote command:
:SYSTem:ERRor[:NEXT]? on page 658
Each time a SYST:ERR:NEXT? query is sent, the eldest entry in the error queue is
returned and at the same time cleared in the list.
:SYSTem:ERRor:STATic? on page 659
Queries the list of all errors.
Clear History
Clears all messages in the "History" view.
Remote command:
:SYSTem:ERRor:ALL? on page 656
Each time a SYST:ERR:ALL? query is sent, the error queue is returned and at the
same time cleared.
:SYSTem:ERRor:HISTory:CLEar on page 659
Clears the messages in the "History" view.
15.5 Resolving Network Connection Failures
Several issues may cause failures in the network connection to the instrument. This
section lists the most likely reasons and the recommended solutions.
Common reasons for network connection failures
●
Network connecting cables and cable connectors of poor quality
●
Incompatibility between the network interface of the R&S SMA100B and certain
switches or routers available on the market
●
An invalid IP address assigned to the instrument
Resolving Network Connection Failures