Rohde & Schwarz SMAB-B92 - Page 96

Analog Modulations
R&S
®
SMA100B
94User Manual 1178.3834.02 ─ 05
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode ............................................................................................................................ 94
ASCII File Settings........................................................................................................94
Select (ASCII) Source/Select (ASCII) Destination........................................................ 94
Select Source/Select ASCII Destination....................................................................... 95
Import / Export...............................................................................................................95
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 624
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 590
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 538
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 623
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 624
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 624
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 588
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 589
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 589
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension on page 538
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal
on page 539
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn
on page 539
Select (ASCII) Source/Select (ASCII) Destination
In "Mode > Import", access the file select dialog that provides standard file handling
functions.
Modulation Settings